Posts

Paradise for geologists

Welcome to incredible Iran: Paradise for geologists!

Give us your hands until to familiar with beauties of Iran. Geological history of Iran is full of events, created widespread volcanic, magmatic and metamorphic outcrops. Thick stratigraphic sequences are naked across the country.

Our country hosts so many major faults, long anticlines and perched synclines, the beauty phenomena for structural geologists. Iran also is the country of Quaternary deposits and landforms extend from mountains top (glaciers) to the hill slope (alluvium) and from there to the lowlands in central Iran where the fascinated deserts, salt lakes, sand dunes and Yardangs have created a very attractive landscape for geologist and geomorphologists.

West of Iran is domain of karstic features, such as beautiful caves and large sinkholes which are formed during the last glacial stage.

Landslides are frequent in everywhere, including the Seimareh landslide with kilometers in length and width, well known as the largest landslide in the world.

The Zagros Mountain is located in the south and southwest of Iran. The famous structural – sedimentary zone contains the largest oil and gas reservoirs.

Our international guests can see the continuous stratigraphic sequence with several kilometers thick from Jurassic up to Pliocene, bare and easily to investigations.

The south of Iran also is the best place for visit unique salt domes, mud volcanoes and recent reefal limestone.

Iran also has an exceptional geographic and climatic conditions. The difference temperature between north and south sometimes reaches to 30 centigrade.

In the North, the shore line of the Khazar Sea, as the largest lake in the world, and its surrounding area with mountainous forest, are the attractive place for millions of tourists in all seasons. In this region, the natural beauties are in your path.

Toward central and southern parts of Iran can enjoy the magnificent and beautiful deserts, Kavirs as well as salt lake and playas have extended far away.

Damavand, Sabalan and Sahand as the most famous volcanoes of Iran and their young volcano-clastic rocks welcome to all volcanologists throughout the world.

There are so many Geo-parks and Geo-sites that increase your familiar with other natural beauties of Iran.

All attractions with low cost traveling, unbeatable security and hospitable people will excite you for travelling to Iran again and again.

“ZaminGasht” is a window to meet you the natural beauty and geological phenomena of Iran. We have numbers of Iranian experts in all branches of geoscience who can identifying natural beauty of Iran to all international geoscientists and geo-tourists.

Orogenic Events

Pan-African

The Pan-African orogeny is equivalent to Asynitic in other parts of the earth. This event was associated with metamorphism, magmatism, folding, and faulting during Late Precambrian–Early Cambrian in Iran (e.g., south of Zanjan–Mahabad in Azerbaijan, Bafq in Central Iran. This tectonic phase started with tension or extension leading to the formation of rifts and generation of oceanic crust (e.g., in Takab and Anarak) and ended with folding, closure, metamorphism, growth of the continental crust, and development of regional faults.

Caledonian

There was no considerable folding or faulting related to this event in Iran. The Caledonian orogeny in Iran is characterized by facies change in sedimentary basins, hiatuses, and epeirogenic movements (e.g., parts of Alborz, Zagros, and Central Iran). This phase, starting from Late Cambrian, caused the marine facies of Barut and Zaigoon Formations to change into the continental facies of Lalun Formation, and continued on to Late Devonian.

Hercynian

The effects of this orogenic episode in Iran can be traced from the Late Devonian. Due to the scarcity of magmatism, metamorphism, and folding related to this episode, the role of the Hercynian orogeny in Iran is controversial; the Hercynian in Iran is largely represented by extensional rather than compressional tectonics (e.g., Sanandaj–Sirjan). Iranian microplates east and northeast of the Zagros were detached from Gondwana in the Carboniferous during this orogenic phase.

Early Cimmerian

The Early Cimmerian orogeny is one of the most important tectonic events in the geological history of the earth. Many diverse features are associated with this phase, including metamorphism, magmatism, folding, faulting, creation of new basins, and facies change. This event was associated with compressional tectonics in the northern Iran and tensional tectonics in the south. There is evidence that the compressional phase was preceded by tension and rift development. The compressional phase, happening in the Late Triassic, finally led to the closure of the Paleotethys (e.g., southeast to southwest of Caspian Sea). Iranian microplates that had been detached from Gondwana in the Carboniferous and that had been submerged and had moved northwards toward Laurasia finally collided with the Eurasian section of the northern supercontinent Laurasia in the Late Triassic.

Late Cimmerian

The Late Cimmerian orogeny occurred as a significant tectonic event in Iran in Late Jurassic–Early Cretaceous times. This event is represented by folding, facies changes in sedimentary environments, angular unconformity, magmatism, and metamorphism (e.g., Alborz, Sanandaj–Sirjan, and Central Iran). The Jurassic granite of Kolah Ghazi, Shir Kuh, and Shah Kuh was made during this orogenic phase.

Laramide

The Laramide orogeny happened in the Late Cretaceous–Paleocene and played a great role in the geological evolution of Iran. This event started under a compressional regime, followed by an extensional one. The compressional regime, that was associated with significant intrusive magmatic activities, led to the closure of the oceanic basins and Neothetyan rifts. In some areas, slices of the oceanic crust have obducted onto the continental margins producing what could be called ophiolite assemblages or coloured melanges (e.g., mostly seen suture zone between Sanandaj–Sirjan and Zagros, and alongside Nehbandan fault in the east of Iran). The Upper Cretaceous-Paleocene granite of Mount Alvand was formed during the Laramide orogeny.

Alpine (Pyrenean and Styrian)

With regards to the geological evidence, this event was of compressional nature. This tectonic phase is represented by significant changes in the sedimentary environments, plutonism, and metamorphism (e.g., west of Central Iran, south of Central Alborz, Lut). The Sahand-Bazman volcanic arc or belt was mainly formed during the Eocene volcanism of the Alpine orogeny. The northern movement and the final collision of Afro-Arabia (significantly the Arabian Plate) with the Iranian Plate and the clockwise rotation of the Eurasian Plate towards the Iranian Plate caused the Alpine orogeny with the Pyrenean phase in the Late Eocene- Early Oligocene and the Styrian phase in the Middle Miocene respectively. The Zagros, Alborz, and Kopet-Dagh mountains were mainly formed in the Miocene during this orogenic phase.

Pasadenian

This orogenic phase began in the Late Pliocene and continued in the Pleistocene. The Pasadenian orogeny is the most important phase in forging the current shape of Iran. Some younger orogenic events might be the continuation of this orogenic phase (e.g., Alborz–Azerbaijan axis, Zagros, Central Iran). Sahand, Sabalan, Damavand, Bazman and Taftanwere mainly formed during the volcanism of this orogenic phase. With an elevation of 5,610 metres, Mount Damavand is the highest peak in Iran. This volcano first erupted in the Pleistocene about 1.78 million years ago and after several known eruptions around 600,000 and 280,000 years ago, it finally erupted in the Holocene almost 7300 years ago.

References: wikipedia

picture from: The Shanderman eclogites: a Late Carboniferous high-pressure event in the NW Talesh Mountains (NW Iran)

Geological and Structural Units

Considering geological and structural units of Iran, three main structural units or zones could be distinguished in Iran. These units or zones are separated from each other by ophiolite–bearing sutures. Other criteria such as structural style, crustal character and age of basement consolidation, age and intensity of deformation, age and nature of magmatism, are used to subdivide these major zones into smaller elements. The three major units and their main constituents could be defined as the southern, central and northern units. The southern unit has a crystalline basement consolidated in the Precambrian time and a platform–type Paleozoic development and comprises the Zagros folded belt, southern and southwestern parts of the Zagros. This section made a part of the Arabian Plate that was located on the margin of Rodinia and Pannotia in the Neoproterozoic, and of Gondwana in the Paleozoic and Mesozoic. The central unit, which comprises the central Iran and the Alborz, is interpreted as an assemblage of fragments that were in the vicinity of the Arabian Plate and formed a marginal section of Rodinia and Pannotia in the Neoproterozoic and of Gondwana in the Cambrian, Ordovician, Silurian and Devonian. These fragments were detached from Gondwana in the Carboniferous. They were submerged, moved northwards, and were finally attached to the Eurasian section of the northern supercontinent Laurasia in the Late Triassic. These fragments or microplates were fused together and made the Iranian Plate which was rejoined by Gondwanic Afro-Arabia in the Late Cretaceous. As Afro-Arabia moved northwards towards Eurasia, the Arabian Plate ultimately collided with the Iranian Plate in the Miocene. Finally there is the northern unit which is separated from the central unit by the North Iran Suture. It is characterized by continental crust including remnants of more or less cratonized former Paleozoic oceanic crust that seems to reflect the Paleotethys. The northern unit represents a marginal strip of the Hercynian realm of Central Asia- broadly overlapped by the Alpine realm. It was deformed and largely consolidated by the Early Cimmerian folding and the Late Alpine folding. The northern unit comprises the South Caspian Depression and the Kopet Dagh Range.

These three main structural units are divided into some smaller geological and structural subdivisions which include the following zones:

Zagros

This zone extends from Bandar Abbas in the south to Kermanshah in the northwest and continues through to Iraq. Zagros is in fact the northeastern edge of the Arabian plate. Some important features of Zagros include: Absence of magmatic and metamorphic events after Triassic, and low abundance of the outcrops of Paleozoic rocks. Structurally, it consists of large anticlines and small synclines and continuous marine sedimentation from the Carboniferous to the Miocene. On the whole, a sequence of Precambrian to Pliocene rocks about 8-10 kilometres in thickness has undergone folding from the Miocene to the Recent time in the Zagros Mountains. The Zagros fold and thrust belt was formed by the collision of two tectonic plates — the Iranian Plate and the Arabian Plate. This collision primarily happened during the Miocene and folded the entire rocks that had been deposited from the Carboniferous to the Miocene in the geosyncline in front of the Iranian Plate. The process of collision continues to the present and as the Arabian Plate is being pushed against the Iranian Plate, the Zagros Mountains and the Iranian Plateau are getting higher and higher. The Zagros mountain range, itself, has a totally sedimentary origin and is made primarily of limestone. In the Elevated Zagros or the Higher Zagros, the Paleozoic rocks could be found mainly in the upper and higher sections of the peaks of the Zagros Mountains along the Zagros main fault. On the both sides of this fault, there are Mesozoic rocks, a combination of Triassic and Jurassic rocks that are surrounded by Cretaceous rocks on the both sides. The Folded Zagros (the mountains south of the Elevated Zagros and almost parallel to the main Zagros fault) is formed mainly of Tertiary rocks, with the Paleogene rocks south of the Cretaceous rocks and then the Neogene rocks south of the Paleogene rocks.

Sanandaj–Sirjan

This zone is located to the south-southwest of Central Iran and the northeastern edge of Zagros range. In the north and northeast, this zone is separated from Central Iran by depressions like Lake Orumiyeh, Gavkhouni and faults like Shahr-e-Babak and Abadeh, and to the south-southwest by the main thrust fault of Zagros. A striking feature of this zone is the presence of immense volumes of magmatic and metamorphic rocks of Paleozoic and Mesozoic eras. As far as the trends, and particularly the folding style is concerned, some researchers consider the Sanandaj–Sirjan Zone as being similar to Zagros; however, considerable differences exist in rock types, magmatism, metamorphism, and orogenic events. There are some similarities between Sanandaj–Sirjan and Central Iran.

Sahand–Bazman Volcanic Belt

This volcanic belt, which is usually called the Central Iranian Range, runs east and almost parallel to the Sanandaj–Sirjan Zone, and owes its existence to the widespread and intensive volcanic activity which developed on the Iranian plate from the Upper Cretaceous to Recent time. The peak of this volcanism happened in the Eocene. The Sahand-Bazman volcanic belt is supposed to have resulted from the collision of the Arabian and Central Iranian continental plate margins. It is represented by sub-alkaline volcanics that vary in composition from basaltic through andesitic to rhyolitic composition.

Central Iran

Located in a triangle in the middle of Iran, Central Iran is one of the most important and complicated structural zones in Iran. In this zone, rocks of all ages, from Precambrian to Quaternary, and several episodes of orogeny, metamorphism, and magmatism can be recognized. Central Iran in a broad sense, comprising the whole area between the North and South Iranian ranges. Within the Iranian plate the Central-East Iran microplate is bordered by the Great Kavir Fault in the north, by the Nain–Baft Fault in the west and southwest and by the Harirud Fault in the east. It is surrounded by the Upper Cretaceous to Lower Eocene ophiolite and ophiolitic melange. The microplate consists of different structural components; Kerman-Tabas Block, Yazd Block and Anarak-Khur Block.

Eastern Iran

Eastern Iran can be divided into two parts: Lut Block and Flysch Zone (flysch or coloured melange of Zabol–Baluch Zone). Located to the west of Zabol–Baluch Zone, Lut Block is the main body of Eastern Iran. Lut Block extends for about 900 km in a north–south direction. It is bounded in the north by Dorooneh fault and in the south by Jazmurian depression. In the east, it is separated from Flysch Zone by the Nehbandan fault, whereas the western boundary with Central Iran is Nayband fault and Shotori Mountains. The oldest units include upper Precambrian Lower Cambrian schists overlain by Permian limestone and other Paleozoic sedimentary rocks. Flysch Zone (Zabol–Baluch) is located between Lut Block to the west and Helmand (in Afghanistan) to the east. In contrast to Lut Block, the Flysch Zone is highly deformed and tectonized and consists of thick deep-sea sediments like argillaceous and silicic shales, radiolarite, and pelagic limestone and volcanic rocks such as basalt, spilitic basalt, diabase, andesite, dacite, rhyolite, and subordinate serpentinized ultramafic rocks. The basement is likely composed of an oceanic crust. Most rock units in this zone fall into three main groups: flyschoid sediments; volcanic, volcanosedimentary, and intrusive rocks; and ophiolitic series.

Southeastern Iran or Makran

Southeastern Iran or Makran zone is located to the south of Jazmurian depression. Its western boundary is Minab fault; to the south, it is restricted by the Gulf of Oman, and to the east, it extends into Pakistan. The northern part is characterized by dominance of east–west trending faults, Bashagard fault being the most important one. Along these faults lies large section of ophiolite series. The oldest rocks in this zone are the ophiolites of Late Cretaceous–Paleocene overlain by a thick sequence (about 5,000 m) of sandstone, shale, and marl. The whole sequence is deformed prior to Early Miocene. Thick sequence of Neogene rock units, in excess of 5,000 m, covers the older series.

Kopet Dagh

The northeastern active fold belt of Iran, the Kopet Dagh, is formed on the Hercynian metamorphosed basement at the southwestern margin of the Turan Platform. The belt is composed of about 10 kilometres of Mesozoic and Tertiary sediments (mostly carbonates) and, like the Zagros, was folded into long linear northwest-southeast trending folds during the last phase of the Alpine Orogeny, in the Miocene and Plio-Pleistocene time. No magmatic rocks are exposed in Kopet Dagh except for those in the basement in the Aghdarband and some Triassic basic dikes. This basin was located in the northeastern Iran. From Middle Jurassic, it was covered with a vast continental shelf sea. In this period of time and due to transgression as well as rapid subsidence basin, the western part became deeper. In this basin, a thick sequence of continuous marine and continental sediments was deposited (about 10 km). No major sedimentary gap or volcanic activities during Jurassic to Miocene have ever been reported. This sedimentary complex provides suitable conditions for accumulation of hydrocarbons. Kopet Dagh sedimentary rocks were placed in their current position due to uplifting at the end of the Miocene. The Kopet Dag Range, itself, is made chiefly of Cretaceous rocks with a smaller portion of Jurassic rocks in the southeastern parts. The mountains were mainly formed in the Miocene during the Alpine orogeny. As the Tethys Sea was closed and the Arabian Plate collided with the Iranian Plate and was pushed against it, and with the clockwise rotation of the Eurasian Plate towards the Iranian Plate and their final collision, the Iranian Plate was pressed against the Turan Platform. This collision folded the entire rocks that had been deposited in this geosyncline or basin from the Jurassic to the Miocene and formed the Kopet Dag Mountains.

Alborz

The Alborz mountain range forms a barrier between the south Caspian and the Iranian plateau. This range is located in northern Iran, parallel to the southern margin of Caspian Sea. Alborz is characterized by the dominance of platform-type sediments, including limestone, dolostone, and clastic rocks. Rock units from Precambrian to Quaternary have been identified, with some hiatuses and unconformities in Paleozoic and Mesozoic. Unlike its northern and southern boundaries, (Caspian Sea and Central Iran, respectively) there is not a consensus regarding the eastern and the western limits of Alborz. The Binalud Mountains in the east, although the continuation of the Alborz, bear features comparable to those of Central Iran. The Alborz mountain range is only 60–۱۳۰ km wide and consists of sedimentary series dating from Upper Devonian to Oligocene, prevalently Jurassic limestone over a granite core. Continental conditions regarding sedimentation are reflected by thick Devonian sandstones and by Jurassic shales containing coal seams. Marine conditions are reflected by Carboniferous and Permian strata that are composed mainly of limestones. In the Eastern Alborz Range, the far eastern section is formed by the Mesozoic (chiefly Triassic and Jurassic) rocks, while the western part of the Eastern Alborz Range is made primarily of the Paleozoic rocks. The Precambrian rocks can be found chiefly south of the city of Gorgan situated in the southeast of the Caspian Sea and in much smaller portions in the central and western parts of the Central Alborz Range. The central part of the Central Alborz Range is formed predominantly of the Triassic and Jurassic rocks, while the northwestern section of the range is made chiefly of Jurassic rocks. Very thick beds of the Tertiary (mostly of the Eocene) green volcanic tuffs and lavas are found mainly in the southwestern and south-central parts of the range. The far northwestern part of the Alborz that constitutes what is called the Western Alborz Range or the Talish Mountains is made mainly of the Upper Cretaceous volcano-sedimentary deposits with a strip of Paleozoic rocks and a band of Triassic and Jurassic rocks in the southern parts, both in a northwest-southeast direction. With the northward movement of Africa and the Arabian plate and with the closure of the Tethys Sea as the Arabian Plate collided with the Iranian Plate and was pushed against it, and with the clockwise movement of the Eurasian Plate towards the Iranian Plate and their final collision, the Iranian Plate was pressed from both sides. The collisions finally caused the folding of the Upper Paleozoic, Mesozoic, and Paleogene rocks, and the Cenozoic (chiefly the Eocene) volcanism to form the Alborz Mountains mainly in the Miocene. The Alpine orogeny began, therefore, with Eocene volcanism in southwestern and south-central parts of the Alborz and continued with the uplift and folding of the older sedimentary rocks in the northwestern, central and eastern parts of the range during the orogenic phases of importance that date from the Miocene and the Pliocene epochs.

Azerbaijan

There is no agreement regarding the geological setting of Azerbaijan. According to some authors, the northeastern corner could be included in Alborz and the southeastern part in Sanandaj–Sirjan. Some believe that most of Azerbaijan lies in a zone called Azerbaijan–Alborz, and as they indicate, this zone is bounded in the north by Alborz fault, in the west by Tabriz–Urumiyeh fault, and in the south by Semnan fault. According to the some authors, the northern part of Azerbaijan continues to the Caucasus Mountains in Caucasia and the Pontus Mountains in Turkey and the Southern Azerbaijan is comparable with Central Iran and Western Iran and extends to the Taurus Mountains in Turkey. The significant structural event occurring in Early Devonian was accompanied by faulting and fragmentation that led to a different sedimentary facies in Azerbaijan. This orogenic episode generated the Tabriz fault, extending in a northwest–southeast direction from Zanjan depression to the northern mountains of Tabriz (Mishu, Morou) and northwest of Azerbaijan and the Caucasus. This event divided Azerbaijan into two blocks, one block in the northeast with subsidence and sedimentation in Early Devonian and the other in the southwest which remained high until Late Carboniferous.

Asmari formation

The Oligocene–Miocene Asmari Formation of the Zagros Basin is a thick sequence of shallow water carbonate. Asmari formation is the youngest and most important reservoir rock of the zagros Basin in the south-west of Iran.

The Asmari formation has been divided into two members: one is the Sandstone Member of Ahwaz in the south-west of the Khuzestan area and the other one is the Evaporate Member of Kalhor in the Lorestan Province. This formation is divided into three units: the lower Asmari with an Oligocene age, the Middle Asmari with an Aquitanian age, and Upper Asmari with a Burdigalian age. However, these divisions do not exist everywhere.

Also, in some parts of Iran, the lower boundary of Asmari formation is in contact with the Pabdeh Shale formation which is of Paleocene-Oligocene age, but in central Lorestan this formation is overlying the Late Eocene Shahbazan formation and in internal Fars it show a paraconformable contact with the Jahrum formation (Eocene).

The Asmari formation is covered by anhydrites of the Gachsaran formation which is of Early Miocene age, and in internal Fars the upper boundary of Asmari formation is in contact with the Early Miocene Razak formation.

The photo shows the Asmari limestone formation (As) and Gachsaran formation (Gs) Along the shore of Karun 4 Lake Dam near Lordegan city in Chahar mahal va bakhtiyari Province.

Keywords: Asmari formation , Bakhtiyari formation , Gachsaran formation , Geotourism , Iran , Iran Geology , Iran Geotourism , Pabdeh formation , Zagros Mountain , zamingasht

Emam hasan member

Gurpi formation is one of the formation in the Folded Zagros. This formation with bluish-green color consist of alternation of marl and grey shale with intercalations of thin bedded limestone.

This formation also has two limestone members so called “Emam Hasan” and “Seymareh”.

“Emam Hasan limestone member” consist of fine grained limestone, with thick bedded and grey in color with intercalations of marl. This member is feature forming than the other layers of Gurpi formation.

The age of Gurpi formation is Upper Cretaceous (Campanian-Maastrichtian (84 to 66 million years ago)).

The photo shows Emam Hasan limestone member in Anjir anticline in the south of Ilam.

Keywords: Cretaceous , Emam Hasan member , Gurpi formation , Ilam ,  Iran Geology , Iran Geotourism , Zagros Mountain , Zamin gasht

Qezel ozan river

Qezel ozan river is one of the longest rivers of Iran that originate from the Zagros mountain range in Kurdistan and East Azerbaijan provinces. Along the way of Qezel ozan, “Hyrochay”,”Zanjanrood” and “Shahrood” are added to it and arrive to Manjil Dam Lake. From the dam site to the Caspian Sea, the river is called “Sepidroud”.
Qezel ozan River is the only river that originates from Zagros mountain and crossing Alborz mountain, finally flows into the Caspian Sea. Its length is 670 km measured.
Qezel ozan is a phrase in Turkish language and composed of two sections, “Qezel” and “Ozan”. It means “the Great and glorious river”.
The above picture shows a view of river valley in the north-east of Mianeh city and North of Qaflankuh mountain. In this area, the river passes from the West towards the East in a deep canyon (700 meters) and among of the maze of rocks and resistant layers. In this area, slopes are steep and cliff form and end to sharp peak, at the highest points. At the heart of this rough topography, the river has dug its bed as Entrenched meander.
In this area, thick and well bedded extrusive igneous rocks and Pyroclastic rocks, with low angle to the south are build all of ridges of area. This river valley caused by tectonic and erosion has been created over a long time and During long time, the river flows in it.

Keywords: Alborz Mountain , Entrenched meander , Igneous , Iran Geology , Iran Geotourism , Mianeh , Pyroclastic , Qezel ozan , River ,  River valley , rock , Zagros Mountain , Zamin gasht , Ghezel ozan

Maharlu lake

Maharlu Lake is located at 18km of south-east of Shiraz at an altitude of 1560 meters above the sea level and it is one of the tourist and resorts areas due to the proximity to the metropolitan city of Shiraz. This lake is supplied by three rivers, Khoshk, Hamzeh, and Sarvestan and also surrounding mountains runoff. This lake is 28 km long, 10 to 15 km wide and does not have a way to the open sea. Since the rate of evaporation in Maharlu Lake is high, salt covers a layer of it and water is only in the northern and central parts of it with very little depth and high salinity.

One of the interesting phenomena of this lake is the phenomenon of red tide. Red tides are a type of algae that are resistant to salt and when salinity rises, they growth more. The excessive proliferation of these organisms causes increasing the density of algae and place in a layer mode which prevents the air exchange and finally reduction of oxygen to water. In this condition, they produce some of the toxic organisms that are a potential risk for aquatic and hence, they endanger the aquatic and animals life that are adjacent the lake.

Maximum depth of this lake is 3meters so its amount of evaporation is high and this cause a part of lake bed to be covered with a layer of salt, of course the existence of chalky sediments of sachun formation and two salt domes in the east of the lake have considerably effect on its extreme saltiness.

Maharlu lake is a syncline-like subsidence with north west – south east trend and young and seismic sarvestan fault passes through it. It seems that this fault movements, especially in Late Pleistocene, has cause of syncline-like subsidence.

Image is looking to the East. In this Image, part of Maharlu lake, Shiraz-Goshnekan road, Lake Coastal Plain, Limestone mountains overlooking the lake (Asmari formation) and some abandoned buildings are seen.

Sarvak formation in Zagros

The Sarvak Formation (Albian to Cenomanian), forming part of the Bangestan Group, comprises a thick succession of carbonate rocks in the Zagros Basin of Southern Iran. The type section of the Sarvak Formation is situated in the Teng-e-Sarvak area, Khuzestan, and is overlain by the Kazhdumi Formation and underlain by the Ilam Formation. The boundary between Sarvak and Ilam Formation is a disconformity that determined in some area by breccia or conglomerates.

The Sarvak Formation consists of alternation of limestone, shale and marl. Limestone layers of this formation are full of microorganisms known as orbitolina. and Because of more than 60% calcium carbonate in their composition, they have a lot of talent for karstification.

The above image shows outcrop of Sarvak formation at the core of the Chenareh anticline near Pa-alam in Khuzestan province. alternation of well-bedded limestone and thin layers of shale and marl is seen in the picture. Due to the presence of thin layers of marl and shale in its sedimentary sequence, The Sarvak Formation has been eroded very soon and the land is hilly shape.

zg-sv01

In the picture above, outcrop of Sarvak Formation is seen in the core of Chenareh anticline in bright color.

zg-sv02-chenareh

Geological map of Chenareh anticline (Part of the geological map Balarood)